GAT Access 6100 Terminal Series
Introduction
12
HB_GAT-ACCESS6100--EN_14
www.gantner.com
1.3 Target Group
This manual contains information relevant for the different stages in the operating life of the GAT Access 6100.
Information about the installation, commissioning, and operation of the GAT Access 6100 is separated into
corresponding chapters. When a chapter is intended for a specific audience, this is clarified at the beginning of the
chapter. Where not explicitly stated, the information in this manual is intended for all target groups in general.
CAUTION! Injury and property/equipment damage. The tasks described in each chapter must only be
performed by the specified target group. Unqualified personnel who perform the described tasks risk personal injury
or damaging property/equipment.
1.4 Formatting
Safety-Critical Information
The following formatting (with example text) is used in this manual to display important, safety-critical information
that must be read and followed.
NOTE! Following on from this signal word in the manual is a reference text that must be read and followed. The
reference text contains important information. Non-observance can lead to damage of the device or associated
equipment.
Non Safety-Critical Information
The following formatting (with example text) is used in this manual to display important, but not safety-critical
information.
The text accompanying this symbol contains interesting information relevant to the current chapter. You do not
necessarily need to read this text, however it will help you better understand the information in this section or
provide interesting tips for the described device or the operation of the software.
1.5 Contact & Inquiries
If you have any questions concerning the GAT Access 6100, please contact your local sales partner or directly with
one of the GANTNER branch offices. The contact details of the branch offices are provided on the cover of this
manual.
To Next Page
Loading...
Need help?
General
