Gantner GAT Access 6100 Series - Fingerprint Reader Specifications; Housing Materials; Permitted Ambient Conditions

GAT Access 6100 Terminal Series
Technical Data
www.gantner.com HB_GAT-ACCESS6100--EN_14 95
9.8 Fingerprint Reader
Fingerprint reader type:
Optical sensor, 500 dpi @ 8 bit per pixel, active area: 13 x 20 mm
Fingerprint verification time:
< 0.8 seconds
Identification time:
< 1 second
Accepted wrong detection rate:
0.01% (recommended), adjustable
Certification of fingerprint reader:
CE and FCC15
9.9 Housing
Housing material
- Front part:
- Rear part:
- Stand of Enrollment Station:
Shockproof plastic PMMA
Shockproof plastic PC-ABS
Aluminum
Weight
- GAT Access 6100 / BIO / PoE:
- GAT Access 6100 F Enrollment Station:
approx. 0.3 kg
approx. 1 kg
9.10 Ambient Conditions
Permitted ambient temperature
- GAT Access 6100 / PoE:
- GAT Access 6100 F BIO / Enrollment Station:
-10 °C to +55 °C
-10 °C to +40 °C
Permitted storage temperature:
-20 °C to +70 °C
Relative humidity:
20 to 80%, non-condensing
Protection type:
IP 54
Protection class:
III
Environment class based on VdS 2110:
II (conditions in indoor areas)