Gantner GAT Access 6100 Series User Manual

GAT Access 6100 Terminal Series
Operation
www.gantner.com HB_GAT-ACCESS6100--EN_14 73
6.6.3 Verifying the Functionality of a Data Carrier
Complete the following steps to check the access functionality of a data carrier and/or the quality of the fingerprint
data at a GAT Access 6100 F Enrollment Station.
1. Press button four. The “Verify” message is shown on the display.
2. Depending on whether there is fingerprint data stored on the data carrier or not, the following two options are
possible:
a) No fingerprint data saved on data carrier:
Hold the data carrier next to the RFID reading field. The data carrier’s access status will be signaled as shown
in point 3.
b) Fingerprint data saved on data carrier:
Hold the data carrier next to the RFID reading field. The following display is shown:
The visitor must now place one of their previously recorded fingers onto the sensor.

Gantner GAT Access 6100 Series Specifications

General

Brand	Gantner
Model	GAT Access 6100 Series
Category	Touch terminals
Language	English