GAT Access 6100 Terminal Series
General Information
www.gantner.com
HB_GAT-ACCESS6100--EN_14
17
2.4 Operating Modes
The GAT Access 6100 access terminals operate in online mode. They must always be connected to a server/host
computer. In online mode, the GAT Access 6100 automatically sends the information of a data carrier over the
interface to the host computer and waits for an appropriate reaction from the host. An exception is the GAT Access
6100 F Enrollment Station, which usually operates in offline mode.
For instances where an error occurs or the communication is interrupted, the GAT Access 6100 can switch into
emergency mode or out of order mode (depending on the configuration). For more information about the operating
modes, see chapter "6.2 Operating Modes".
To Next Page
Loading...
