AFR-24S User Manual
Step 1 Put the installation DVD into your CD-ROM. Please make sure that the USB device
is connected before you start the driver installation.
Step 2 Choose the model you want to install from the driver list and click on Windows Driver
(Win 7 and above) (Automatic Detection) or (Manual Selection) to start installing the Driver
and AAS plug-in.
Step 3 Click “Next” to start the driver installation.
Step 4 If you were Windows 7 and above users, please click on the red words to instruct
you how to disable Windows Update to allow success driver installation. And then click OK to
next step.
To Next Page
Loading...
