AFR-24S User Manual
File Function (Option Page):
The file function section allows you to manage various cutter parameters. This section is
useful when performing repeated jobs on a variety of objects, allowing you to save your
frequently used cutter parameters and load them in the future.
• Custom Media: This section lists the files for the parameter settings that you have recently
created and worked. You can save more than 50 files to simplify your cutting job.
• Default: This section contains the reference settings that are applicable with the verified
materials to achieve the best cutting results. Please note that the setting value might need
to be adjusted according to different suppliers of materials.
• SAVE: This function will save current print driver parameter settings to a file under the
specified location on your computer. (Saved parameter setting files will be tagged with the
RX II series extension)
• LOAD: This function allows you to load previously saved print driver parameters.
• ORIGINAL: This function will load the print driver’s original factory parameter settings.
• SAVE TO DEFAULT: This function allows you to save your current print driver parameters
as the default startup settings.
• DELETE: This function will delete the file you select from the Custom Media section,
whereas the settings in Default section cannot be deleted. Please note the delete function
only removes the file from the Custom Media section, it does not remove the .RX file from
your hard drive, if you wish to completely remove the file from your hard disk, and you will
have to manually delete the file from your operating system.
Note:
If you are using Windows 2000 or XP as your operating system, then make
sure you login with an administrator or administrator-rights account in order
to properly save cutter parameter settings.
To Next Page
Loading...
