GE Security Vigilant VS1 User Manual

Chapter 3: System operation
134 Vigilant VS1 and VS2 Technical Reference Manual
Figure 48: LCD under off-normal conditions
00:00:00 A001 D001
001 Alarm Active
Computer room closet
Floor 1
Time
A
ct
i
ve po
i
nts
Disabled
points
Event
number
Event type
message
Device
label
Event details display screens
The off-normal events that take place in the system contain event information that is
displayed on the LCD screen. Additional information is available on a secondary
screen. The screen displays the following information based on the type of event that
takes place:
• Loop number: The loop the device is on
• Device number: The device address (number)
• Device type: The type of device that was assigned in programming
• Serial number: The serial number assigned to the device
• Internal event number: See “Event ID numbers and descriptions” on page 146
• Zone number and device label for devices in zones
• Annunciator number and label
• Other information when it is available
Figure 49: Device event details display screen
Loop 1 Device 001
Smoke
Ser#3333333333
L
oop
number
D
ev
i
ce
number
Device
type
Serial
number

GE Security Vigilant VS1 Specifications

General

Brand	GE Security
Model	Vigilant VS1
Category	Control Panel
Language	English