Chapter 4: Reports
172 Vigilant VS1 and VS2 Technical Reference Manual
Correlation Groups report
The panel provides a report for each correlation group in the system. The Correlation
Group report shows all of the devices, zones, and NACs that are assigned to a
correlation group. Correlation group reports can be printed or viewed on the LCD.
To view a Correlation Groups report:
1. Press the menu button and choose Reports.
2. Choose Correlation Groups.
3. Enter the number of the correlation group for which
you want a report.
Main Menu
Reports
Test
Control
Program
⇩
Reports
Device Maintenance
System Status
Correlation Groups
Corr Group Config
⇩
Correlation Groups
Number 001
Correlation Group Configuration report
Correlation group configuration reports list:
• All correlation groups with in-suite signal silence enabled, or
• All correlation groups with an activation count greater than 1. This provides
information on correlation groups programmed for special applications.
To view a Correlation Group Configuration report:
1. Press the menu button and choose Reports.
2. Choose Corr Group Config.
3. Choose one of the following:
• Suite Sig Sil
• ActivationCnt
Main Menu
Reports
Test
Control
Program
⇩
Reports
Device Maintenance
System Status
Correlation Groups
Corr Group Config
⇩
Corr Group Config
Suite Sig Sil
ActivationCnt
To Next Page
Loading...
