Chapter 3: System operation
Vigilant VS1 and VS2 Technical Reference Manual 145
Event type LCD Printer [1]
Monitor type reporting
Zone monitor Monitor MON ACT
Input monitor Monitor MON ACT
Outputs are latched Outputs are latched Outputs are latched
Prealarm reporting Pre-alarm PALM ACT
Alarm verify reporting Alarm verify ALMV ACT
Maintenance alert
reporting
Maint. alert MANT ACT
Trouble All devices Trouble TRBL ACT
Disable All devices Disable DSBL ACT
Test All devices Test TEST ACT
[1] See “Event printout examples” below for an example of how events appear when printed.
Event printout examples
Event information is printed each time an event takes place provided a printer is
connected to the system. The following is an example of what the event information
looks like on the printout and a description of each piece of information printed for an
event.
Annunciator event
TRBL ACT | 18:00:07 01/01/2007 A:008
Annunciator 08
Where:
TRBL ACT = Trouble event
18:00:07 01/01/2007 = Time and date the event took place
A:008 = Annunciator 08
Annunciator 08 = Label (could be the default label or a custom label)
Internal event (panel or loop event)
MON ACT | 18:00:18 01/01/2007 E:010
Loop 2 Initializing
Where:
MON ACT = Monitor event
18:00:18 01/01/2007 = Time and date the event took place
E:010 = Event 010 (see “Event ID numbers and descriptions” on page 146)
Loop 2 initializing = Label (could be the default label or a custom label)
To Next Page
Loading...
