GE Security Vigilant VS1 - Starting and stopping a walk test

Chapter 4: Reports
174 Vigilant VS1 and VS2 Technical Reference Manual
Loop/zone configuration report: Displays loop class, zone, device, mapping, and
correlation group configuration information.
Event configuration report: Displays loop event and panel event configuration
information.
Dialer configuration report: Displays central monitoring station event notification
settings for the points in the system.
To view a System Configuration report:
1. Press the menu button and choose Reports.
2. Choose System Configuration.
3. Choose:
All
Panel Operation
Panel Configuration
Loop/Zone Config
Devices
Event Config
Dialer Config.
Main Menu
Reports
Test
Control
Program
⇩
Reports
Correlation Groups
Corr Group Config
Zone
System
Configuration
⇩
System Configuration
All
Panel Operation
Panel Configuration
Internal Status report
The panel provides an Internal Status report that displays the current values for AC
voltage, battery voltage, and battery charge current. Internal Status reports can be
printed or viewed on the LCD.
To view an Internal System Status report:
1. Press the menu button and choose Reports.
2. Choose Internal Status.
Main Menu
Reports
Test
Control
Program
⇩
Reports
Zone
System
Configuration
Internal Status