GE Security Vigilant VS1 User Manual

Copyright
© 2010 GE Security, Inc.
This document may not be copied in whole or in part or
otherwise reproduced without prior written consent from
GE Security, Inc., except where specifically permitted under
US and international copyright law.
Disclaimer
The information in this document is subject to change
without notice. GE Security, Inc. (“GE Security”) assumes no
responsibility for inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks, personal or
otherwise, incurred as a consequence, directly or indirectly,
of the use or application of any of the contents of this
document. For the latest documentation, contact your local
supplier or visit us online at www.gesecurity.com.
This publication may contain examples of screen captures
and reports used in daily operations. Examples may include
fictitious names of individuals and companies. Any
similarity to names and addresses of actual businesses or
persons is entirely coincidental.
Trademarks and patents
GE and the GE monogram are trademarks of General
Electric Company. The Vigilant VS1 and VS2 name and logo
are trademarks of GE Security.
Other trade names used in this document may be
trademarks or registered trademarks of the manufacturers
or vendors of the respective products.
Intended use
Use this product only for the purpose it was designed for;
refer to the data sheet and user documentation for details.
For the latest product information, contact your local
supplier or visit us online at www.gesecurity.com.
FCC compliance
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
You are cautioned that any changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Manufacturer
GE Security, Inc.
HQ and regulatory responsibility:
GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL
34202, USA
EU authorized manufacturing representative:
GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The
Netherlands

GE Security Vigilant VS1 Specifications

General

Brand	GE Security
Model	Vigilant VS1
Category	Control Panel
Language	English