GE Healthcare B30 - Factory Default Parameters; Moving between Numerical Trend Pages; Numerical Trend Pages; Recording and Printing

B30 Patient Monitor
6-10
Numerical trend pages
Numerical trends contain:
− four pages of maximum 72 hours trend information
− real-time ECG on top of each page
Resolution is five minutes.
Moving between numerical trend pages
•
Use the ComWheel to scroll the trend in vertical direction.
When the highlight reaches the top or the bottom of the view, next five minutes of information
appear.
Recording and printing
Recording
Parameters for recording are chosen during configuration. To change the parameters, see
section ”Monitor setup.”
1. Press the
Print/Record key.
2. Select Record Trends.
3. Select Record Numerical.
Printing
1. Press the Pt.Data & Trends key and select Trends.
2. To print all the numerical trend data, select Numerical - Print Page.
Factory default parameters
You cannot change the contents of numerical trend fields. The parameter units follow the real
time waveform settings of each parameter.
Page 1: Vital parameters
Mark Time HR SpO2 NIBP
sys/dia
NIBP
mean
Art
sys/dia
Art
mean
CVP
mean
CO2
ET
Page 2: Hemodynamics
Mark Time P1
Art
P2
CVP
C.O. REF PCWP
Page 3: Gases
Mark Time CO2
ET/FI
RR
Page 4: Temperatures and saturations
Mark Time T1 T2 Tblood SpO2 SvO2