B30 Patient Monitor
2-10
Keyboards
You can control monitoring through the keys on the Command Board and side panel, module.
For more information, see section ”Monitoring basic.”
Command Board keys
Figure 2-11 Command Board keys and LED indicators
(1) ON/standby key
(2) Mains power ON (lit) or OFF (dark): indicates mains or external DC power
(3) For admitting or discharging a patient; for selecting user modes
(4) For viewing trends and alarm history
(5) For activating parameter specific menus. NOTE: All modules do not measure all of these
parameters. For more information, see “Module overview” on page 2-4.
(6) For returning the Normal Screen view to the screen
(7) For activating pulse oximetry, impedance respiration and temperature setup menus
(8) For printing and recording different trends and waveforms
(9) For setting up the monitor and for activating the HELP menu
(10) Battery operation LEDs, see “Batteries” on page 2-12.
ECG
Airway
Gas
Invasive
Pressures
Normal
Screen
Others
NIBP
10
9
8
7
6
5
43
2
1
Admit/
Discharge
Pt.Data
& Trends
Print/
Record
Monitor
Setup
To Next Page
Loading...
