GE Healthcare B30 - Setting heart rate alarm limits

ECG
11-9
Starting relearning manually
When the patient’s ECG pattern changes considerably, the monitor should start relearning a
new ECG pattern. The pattern changes, for example, when changing the patient’s position. To
start relearning manually:
1. Press the
ECG key.
2. Select Relearn.
Setting heart rate alarm limits
To set the heart rate alarm limits:
1. Press the
ECG key.
2. Select ECG Alarms.
3. Select Adjust Limits.
You can also adjust the limits through
Alarms Setup - Adjust Limits. For detailed instructions,
see section ”Alarms.”
ECG
ECG