B30 Patient Monitor
8-6
Recording trends
To record trends:
1. Press the
Print/Record monitor key.
2. Select Record Trends – Record Numerical or Record Graphical.
3. Stop recording by selecting Stop Numerical or Stop Graphical.
You can record numerical, graphical or tabular trends.
Recording numerical trends
Since the contents of the numerical trends are preconfigured, you cannot choose the
parameters or change their order.
The following parameters are printed in the numerical trend record:
Figure 8-3 Numerical trend printout
For pressures, either Sys/Dia or Mean are recorded depending on the digit format selected in
the pressure setups. PCWP is measured from the pressure channel labeled PA.
Parameter Printed values and units
HR and SpO2 bpm/SpO2
NIBP Sys/dia or mean mmHg
P1 “Art“ Sys/dia or mean mmHg
P2 “CVP“ Sys/dia or mean mmHg
T1/T2 Celsius or Fahrenheit
CO2 ET/FI %, kPa or mmHg
Resp. Rate Breaths per minute
To Next Page
Loading...
