Alarms
4-13
Other adjustable features
NOTE: This section describes the rest of the adjustable features regarding the alarms. You can
adjust each feature if you know the required password for entering the Install/Service menu. If
you wish to adjust the settings, we recommend that you contact the person responsible for the
entire configuration.
Displaying limits
You may select the alarm limits to be displayed next to the numerical parameter value.
1. Press the
Monitor Setup key.
2. Select Install/Service and enter the password.
3. Select Installation - Alarm Options.
4. Select Show Limits and YES or NO.
The alarm limits become visible when patient monitoring begins and the monitor receives
patient data.
Monitor
Setup
To Next Page
Loading...
