Troubleshooting and System Messages
Invenia ABUS 2.0 – System Setup and Basic Service Manual 7-37
4700-0043-00 Rev. 4
Processing... The acquired image data is being processed for
display. Wait until the acquisition is complete before
performing any further actions.
Scan finished The system has completed scanning for this View
Type.
Scan limit reached Confirm system Storage Status via the General
Configuration page.
Scan order for this patient already selected The scan order has already been specified for this
patient. You can select additional View Types for this
patient via the Select Tab.
Scan started Allow the scan to complete, or Abort the scan.
Invenia ABUS 2.0 Initializing... The system is in the process of starting up.
Scanning The system is performing the scan.
Select scan order Specify the workflow.
Select scan type Specify the View Types you want to use for this
patient.
The user name or password you entered is
incorrect.
A valid user name and password must be entered to
use the system.
There are scans missing for this patient. Are you
sure you want to finish?
Informs the user that there are scans that have been
selected to be completed for the patient and these
scans have not yet been completed. Prompts user to
select whether or not they would like to finish the
session before completing all scheduled scans.
There are scans missing for this patient. Are you
sure you want to logout?
Informs the user that there are scans that have been
selected to be completed for the patient and these
scans have not yet been completed. Prompts the
user to select whether or not they would like to finish
the exam before logging off and allowing another
user to use the system.
Transducer is moving. Please wait. Please allow the transducer to complete the scan.
You must first select a patient A patient must be selected from the Worklist before
scanning can begin.
Please finish the current scan! The current scan is processing, the user must finish
the current scan.
Table 7-5: Invenia ABUS 2.0 Messages
System Message Cause/Action to Take
To Next Page
Loading...