GE MEDICAL SYSTEMS
D
IRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
Chapter 8 Replacement Procedures 8-197
8-11-3 Standard Confirmation & Functional Checks
Configure the system settings and perform functional checks after installation of software.
Items for configuration and functional checks include:
- Confirmation of the software version
- Setting Computer Name
- Functional Checks for ServicePlatform (Diagnostic Program)
8-11-3-1 Confirmation of Software Version
1.) Touch the Utility button on the Touch Panel
2.) Click on About tab. The software version will be shown on the monitor as shown. Confirm the
following.
3.) Make sure that Software Version: R4.x.x and Software Part Number is described on the Application
CD-ROM.
Figure 8-248 Confirmation of software version
To Next Page
Loading...
