Global Service User Interface (GSUI)
LOGIQ e – Basic Service Manual 7-13
5461614-100 English Rev. 6
Global Service User Interface
(GSUI)
Contents in This Section
• ‘Common Diagnostics’ on page 7-13
• ‘Restart the system after diagnostics’ on page 7-16
Common Diagnostics
Utilities
Provides two selections:
• Disruptive Mode
Allows you to enable or disable disruptive mode
troubleshooting.
• System Shutdown
Allows for system shutdown from the diagnostic menu.
Select to Restart System or Shutdown System. Also, select
to retain Disruptive Mode or Not.
After submitting to restart or shutdown a confirmation
screen gives one last chance to confirm or cancel the
request.
To Next Page
Loading...
