GE LOGIQ e Basic Service Manual

Docking Cart Setup
11-8 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Receiving and Unpacking the Equipment
When a new Docking Cart arrives, check that any components
are not damaged and are not in short supply. If shipping
damage or shortage occurs, contact the address shown in
Chapter 1.
Unpacking Docking Cart
CAUTION
The crate with the Docking Cart weighs approximately 59 kg.
Be prepared for a sudden shift of weight as the unit is removed
from its base (pallet).
Table 11-3: Procedure to take out Docking Cart
No. Steps Corresponding Graphic
1. Cut off the two packing strap
(1-2) and remove them.
Then remove the two
reinforce cardboards and
remove the top cover.
2. Rotate the knob
counterclockwise until it is
loose and remove it.

GE LOGIQ e Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
Type	Ultrasound System
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler
Applications	abdominal, cardiac, vascular, OB/GYN, musculoskeletal, small parts
Probes	linear, phased array
Portability	Portable
Connectivity	DICOM, USB, Ethernet