GE LOGIQ e - System Configuration; Contents in this Section

System Configuration
LOGIQ e – Basic Service Manual 3-19
5461614-100 English Rev. 6
System Configuration
Contents in this Section
• ‘LOGIQ e configuration’ on page 3-20
• ‘Electrical requirements for Adapter’ on page 3-21
• ‘Approved peripherals’ on page 3-21
• ‘Connecting Cables’ on page 3-22
• ‘Peripheral/Accessories Connector Panel’ on page 3-23
• ‘Pin Assignment’ on page 3-24
• ‘Available probes’ on page 3-30
• ‘Software Options configuration’ on page 3-31