Replacement Procedures
8-14 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Data Management - moving all images
• Move the images to a remote server or to removable media.
For instructions, please see “Disk management” in the User
Manual/User Guide.
Backing up the Patient Archive and System Configurations
• Backup the Patient Archive and System Configurations.
For instructions, please see “Data Backup and Restore” in
the User Manual/User Guide.
CAUTION
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ e before doing backup of the Patient
Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
CAUTION
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ e before doing backup of the Patient
Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
To Next Page
Loading...
