Network Configuration
LOGIQ e – Basic Service Manual 7-21
5461614-100 English Rev. 6
Software Download (continued)
3. Select Download. The download process starts. The
progression of the download process is displayed.
NOTE: The download step can be paused. While paused, you can
return to normal operation. However, once the software
installation has begun, the system is not enabled until the
software installation is done. While installation, DO NOT
turn off system power.
NOTE: A typical software update of about 600Mb may take up to 60
minutes to download, but times vary depending on your
location and network connection.
Figure 7-17. Pause the Download
Pause: Pauses the software download process. If you
select Pause, you can cancel out of this dialog and return to
normal scanning or you can power off the scanner. A
paused download can be resumed by logging in as
administrator, pressing the power switch and selecting
Resume.
Resume: Select Resume to continue the software
download.
To Next Page
Loading...
Need help?
General
