Safety considerations
LOGIQ e – Basic Service Manual 1-25
5461614-100 English Rev. 6
Probes
Follow these guidelines before connecting a probe to the
Ultrasound system:
• Inspect the probe prior to each use for damage or
degradation to the:
• housing
• cable strain relief
• lens
• seal
• connector pins
• locking mechanism
• Do not use a damaged or defective probe.
• Never immerse the probe connector or adapter into any
liquid.
Peripherals
Refer to the Patient Safety Environment section of the User’s
Manual for peripheral isolation information.
To Next Page
Loading...
Need help?
General
