GE LOGIQ e Basic Service Manual

Completing the setup
LOGIQ e – Basic Service Manual 3-15
5461614-100 English Rev. 6
Power on the system
Press the Power On/Off switch at the front of the system once.
Figure 3-7. Power On/Off Switch
When the Power On/Off switch on the Control Panel is pressed
once, the Back-end Processor starts and the software code is
distributed to initiate the scanner.
No status messages are displayed during this process.

GE LOGIQ e Specifications

General

Brand	GE
Model	LOGIQ e
Category	Medical Equipment
Language	English