GE MiCOM P40

DDB Signal Name DDB Signal Number Source Module (Module Number) Destination Module (Module Number.)
AR CB2 No C/S 330 CB2 Healthy and System Check Timers (40) CB2 Autoreclose Lockout (56)
AR CB2 Unhealthy 329 CB2 Healthy and System Check Timers (40)
Force 3-phase Trip (10)
CB2 Autoreclose Lockout (56)
Leader Follower Logic (7)
AR Enable 1384 AR Enable (5)
AR Enable CB1 1609
AR Enable (5)
Leader Follower Logic (8)
AR Modes Enable (9)
Leader Follower Logic (7)
AR Enable CB2 1605
AR Enable (5)
AR OK (8)
AR Modes Enable (9)
Leader Follower Logic (7)
AR Force CB1 3P 858 Force 3-phase Trip (10) CB Trip Conversion (63)
AR Force CB2 3P 1485 Force 3-phase Trip (10) CB Trip Conversion (63)
AR In Service 1385 AR Enable (5)
Leader Follower Logic (8)
Force 3-phase Trip (10)
AR Modes Enable (9)
Autoreclose Lockout (55)
CB2 Autoreclose Lockout (56)
Leader Follower Logic (7)
AR Mode 1P 1497 AR Modes Enable (9)
AR Mode 3P 1498 AR Modes Enable (9)
AR OFF Pulse 1383 AR Enable (5)
AR On Pulse 1382 AR Enable (5)
AR Start 1541 CB1 AR In Progress (16)
Fault Memory (15)
CB1 AR In Progress (16)
CB2 AR In Progress (17)
Sequence Counter (18)
Dead Time Start Enable (22)
1-phase AR Dead Time (24)
3-phase AR Dead Time (25)
Follower CB AR Enable (27)
Follower 1-phase CB AR Time (28)
Follower 3-phase CB AR Time (29)
AR Reset Successful (37)
CB2 AR Reset Successful (38)
AR Trip Test 3ph 576 Trip Test (12)
AR Trip Test A 577 Trip Test (12) AR Initiation (11)
AR Trip Test B 578 Trip Test (12) AR Initiation (11)
AR Trip Test C 579 Trip Test (12) AR Initiation (11)
ARIP 1542 CB1 AR In Progress (16)
1-phase AR Cycle Selection (19),
1-pole / 3-pole trip (13)
Sequence Counter (18)
Dead Time Start Enable (22)
CB1 Autoclose (32)
CB2 Autoclose (33)
Leader Follower Logic (7)
Auto Close CB1 854 CB1 Autoclose (32)
Reclaim Time (35)
CB Control (43)
Chapter 11 - Autoreclose P446SV
278 P446SV-TM-EN-1