GE MiCOM P40

DDB Signal Name DDB Signal Number Source Module (Module Number) Destination Module (Module Number.)
Live Bus 2 1461 System Checks Voltage Monitor (59)
3 Phase AR System Check CB2 (46)
3 Phase AR System Check CB2 (48)
CB2 Manual Close System Check (52)
Live Line 888 System Checks Voltage Monitor (59)
3 Phase AR System Check (45)
3 Phase AR System Check (46)
3 Phase AR System Check (47)
3 Phase AR System Check (48)
CB1 Manual Close System Check (51)
CB2 Manual Close System Check (52)
ManCB1 Unhealthy 304 CB Control (43)
ManCB2 Unhealthy 326 CB Control (44)
MCB/VTS 438
System Checks Voltage Monitor (59)
Check Sync Signals (60)
CB2 Check Sync Signals (61)
MCB/VTS CB1 CS 1521
System Checks Voltage Monitor (59)
Check Sync Signals (60)
MCB/VTS CB2 CS 1423
System Checks Voltage Monitor (59)
CB2 Check Sync Signals (61)
NoCS CB1ManClose 305 CB Control (43)
NoCS CB2ManClose 327 CB Control (44)
OK Time 3P 1555 3-phase AR Dead Time (25)
Dead Time Start Enable (22)
CB1 Autoclose (32)
CB2 Autoclose (33)
Prepare Reclaim Initiation (34)
CB1 Healthy and System Check Timers (39)
CB2 Healthy and System Check Timers (40)
Pole Dead A 892 CB Trip Conversion (63)
Pole Dead B 893 CB Trip Conversion (63)
Pole Dead C 894 CB Trip Conversion (63)
Pole Disc. CB1 Ext 451 Pole Discrepancy (62)
Pole Disc. CB2 Ext 1606 Pole Discrepancy (62)
Pole Discrep. CB1 699 Pole Discrepancy (62)
Pole Discrep. CB2 1607 Pole Discrepancy (62)
Rst CB1 CloseDly 443 CB Control (43)
Rst CB2 CloseDly 1419 CB2 Control (44)
Rst CB1 Lockout 446 Reset CB Lockout (57)
Rst CB2 Lockout 1420 Reset CB2 Lockout (58)
SChksInactiveCB1 880 Check Sync Signals (60)
SChksInactiveCB2 1484 CB2 Check Sync Signals (61)
Seq Counter = 0 846 Sequence Counter (18) AR Modes Enable (9)
P446SV Chapter 11 - Autoreclose
P446SV-TM-EN-1 287