GE Responder 2000

2026116-001 Revision B Responder™ 2000 Page 26
TO REMOVE THE BATTERY
1. Press the battery release until the battery ejects.
2. Pull the battery straight out until it clears the housing.
WARNING: The Responder 2000 should not be stored with the battery inserted. Remove the battery from the
Responder 2000 when storing the device.
TO CHECK THE BATTERY
1. Press the test button on the top of the battery.
2. The row of lights will all light up when the battery is fully charged.
3. If the lights do not light up, or only partially light up, the battery is fully or partially discharged.