GE Responder 2000

2026116-001 Revision B Responder™ 2000 Page 87
PACING SETTINGS
The Responder 2000 Pacing settings can be configured to the desired setting from the Settings or Pacing mode box on
the startup menu. Pacing mode is turned off by default.
TO CHANGE PACING SETTINGS FROM SETTINGS MENU
1. From the Settings menu, rotate the Rotary Selector Knob to Pacing Settings and push Rotary Selector Knob to
select.
2. Select Pacing Default Parameters – Mode and Rate (PPM) by rotating Rotary Selector Knob to each setting. Push to
select setting, rotate to select option, and push to select desired default setting.
3. Rotate Rotary Selector Knob to Accept push to confirm settings.