2026116-001 Revision B Responder™ 2000 Page 43
INFORMATION AREAS
The right side of the screen contains specific monitoring information for ECG (top box), SpO
2
(Oximetry) and Pacing if
these two options are present. To access the information areas:
1. Rotate the Rotary Selector Knob until the outline of the information box is highlighted then press to select the
information area.
2. Rotate the Rotary Selector Knob again to highlight a particular item within the highlighted box to change the setting.
Press to select the item then turn the knob to scroll through the value range for that item.
3. Press to confirm a new value.
ECG INFORMATION BOX
The ECG Information box shows ECG information.
The value shown for heart rate is determined from the ECG of channel 1 input, which can be from ECG electrodes or
Pads, paddles or spoons.
The low and high alarm ECG limits can also be set from this box.
SPO
2
INFORMATION (OPTIONAL)
When the pulse oximetry option is present and a sensor is connected, the SpO
2
Information area displays SpO
2
information. The SpO
2
information area displays % saturation and pulse rate. SpO
2
high and low alarm limits can be
changed from the SpO
2
information box.
PACING INFORMATION (OPTIONAL)
When the Pacing option is present and pads are connected, pacing can be turned on. Pacing mode, rate, and pace
current can be set within this information box.