2026116-001 Revision B Responder™ 2000 Page 39
ROTARY SELECTOR KNOB
The Rotary Selector Knob is used for scrolling through (a) all areas of the monitoring screen (set-up menus, sub-menus)
(b) selecting soft keys and (c) setting values. This knob is the primary operator navigation and selection vehicle for the
Responder 2000. It can rotate clockwise and counterclockwise. To make a selection, press the Rotary Selector Knob.
The knob is always active while the system application is running.
SOFT KEYS
Soft keys are buttons which are displayed on the graphics display and are activated by using the Rotary Selector Knob.
1. HIGHLIGHT the selection by rotating the Rotary Selector Knob to move the highlight around the screen until the
setting you wish to change is highlighted.
2. SELECT the item by pressing the Rotary Selector Knob until it clicks.
To Next Page
Loading...
