2026116-001 Revision B Responder™ 2000 Page 117
11. Paper Supply
a) Verify that the paper used is manufactured or
recommended by GE Medical Systems Information
Technologies.
If this is not the case, replace it by
paper manufactured or
recommended by GE Medical
Systems Information Technologies.
b) Confirm paper advances when Print is pressed If this is not the case, please contact
Customer Service.
c) Select Print from main menu. Verify contents printed
correctly.
If Responder 2000 contents are
printed incorrectly, please contact
Customer Service.
12. Reconnect Responder 2000 to electrical outlet. It is now ready for use.
AUTHORIZED REPAIR SERVICE
The Responder 2000 has no user-serviceable internal components. Try to resolve any maintenance issues with the
Responder 2000 by using the Troubleshooting Table presented in this chapter. If you are unable to resolve the problem,
contact Customer Service.
WARNING: Shock Hazard
Do not disassemble the Responder 2000! Failure to observe this warning can result in personal injury or death. Refer
maintenance issues to authorized service personnel.
NOTE: The warranty will be void upon unauthorized disassembly or service of the Responder 2000.
To Next Page
Loading...
