GE Vivid q N - Page 110

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
3-38 Section 3-7 - Completing the Hardware Installation
3-7-2-3-1 Samsung DVD/CD-RW Drive Replacement on Vivid q N Systems without
SafeLock Cart
NOTE: This procedure relates to DVD/CD-RW Drive Samsung Model SE-TO84M/RSBN.
Removal Procedure
1.) To remove the Samsung DVD/CD-RW drive (Model SE-TO84M/RSBN):
a.) Disconnect the USB cable that connects the Vivid q N rear panel to the Samsung DVD/CD-RW
drive rear panel.
b.) Disconnect the 5V power supply output cable from the power port on the Samsung DVD-R/RW
drive rear panel.
2.) Remove the Samsung DVD/CD-RW drive from the system.
Installation Procedure
1.) Unpack the contents of the Samsung Cable Kit (P/N S2423956).
2.) Connect the mini USB connector (Figure 3-29) into the mini USB port located at the rear of the
replacement Samsung DVD/CD-RW Drive (Figure 3-30).
Figure 3-29 Vivid q N Power Supply with Two USB Connectors
Main Power
Connecting
Cable
Samsung DVD/CD-RW
Drive Power Supply
Mini USB Connector
that plugs into mini USB
port on DVD drive
USB connector that
plugs into USB port
on the system