GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-129
.
The eVue Properties Dialog box opens:
6) In the Remote Path field, type in the path to which you want to export MPEGVue (when this feature
is used).
NOTE: If the destination is a constant IP, you can type either the remote computer name or the remote
computer’s ID address in the Remote Path field.
After the path has been typed, it is available for selection from the Dataflow Name
drop-down menu (or you can select an existing path from this menu).
7) Activate the Copy Media Player Installation check box.
NOTE: Step 7 is recommended for the first transfer of MPEGVue files. This step is not needed for
Windows XP. After initial transfer of MPEGVue, it is recommended to disable this check box.
Figure 3-137 eVue Properties
Figure 3-138 eVue Properties Dialog Box
To Next Page
Loading...
