GE Vivid q N - Page 220

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
3-148 Section 3-10 - Connectivity Setup
Stopping the Firewall on Windows XP Service Pack 2
1.) On the network computer, access the Control Panel, as follows:
a.) Press Start.
b.) Select Settings
c.) Select Control Panel from the Menu
2.) Double-click on Windows Firewall.
The Windows Firewall dialog box opens:
3.) Select the General Tab.
4.) Enable the Off check box (as shown in Figure 3-156).
5.) Press OK.
6.) Close all windows to return to the scanning screen.
Figure 3-156 Windows Firewall Dialog Box