GE Vivid q N - Page 279

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 4 - General Procedures and Functional Checks 4-25
4-3-2-4 Wireless USB Network Test
NOTE: When the Wireless Network USB Adaptor is installed in a new system, the functionality is verified as
described in "Configuring the Wireless Adaptor" on page 3-93.
NOTE: When the Wireless Network USB Adaptor is installed in a system that is already configured, proceed as
described below.
4-3-2-4-1 Wireless USB Network Functionality Test
1.) With the system up and running, press Config.
2.) Click Connectivity and select Dataflow - see Figure 4-7.
3.) From the Dataflow Name field scroll-down list (Figure 4-7), select a dataflow that the user works
with in day-to-day operations.
4.) Under Selected devices (Figure 4-7), select the appropriate device.
5.) Click Check.
The Information - Check Status box opens - Figure 4-8.
Figure 4-7 Dataflow showing “Remote Database” as the Selected Device