GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
1-14 Section 1-4 - Safety Considerations
When a non-medical peripheral powered from a non-isolated power source is connected to the
Vivid q N system using a network cable (RJ45), the cable shielding should NOT be soldered to
the LAN connector.
Refer to Figure 1-3, below.
1. Do NOT use a soldered LAN connector when connecting the scanner directly to a peripheral device.
Figure 1-3 Example of Soldered LAN Connector
To Next Page
Loading...
