GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
7-146 Section 7-7 - Automatic Error Log
4.) Observe the progress bar completion, as shown in Figure 7-110.
5.) Click Close to terminate and exit the Upload utility.
6.) Inform the local GE personnel that you have uploaded files to the GE ftp site.
NOTE: In the event that the upload process fails, check your local network security settings to make
sure that they did not prevent the upload. Otherwise, contact GE personnel.
7-7-2-4 DB Scan
To Perform the Database Scan Procedure:
1.) Press <ALT> + D.
The System Problem Reporting dialog opens:.
Figure 7-110 Upload Complete
Figure 7-111 System Problem Reporting - Advanced
To Next Page
Loading...
