GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-33
8-3-2-1 Tools
Use the appropriate Phillips and flat screw drivers, as indicated in the bottom assembly replacement
procedures.
8-3-2-2 Time Required
15 minutes
8-3-2-3 Preparations
Shut down the Vivid q N ultrasound unit, as described in Chapter 3 - System Setup.
When removing the boards, ESD may cause damage to a board. Always have the ESD hand strip
connected to the machine chassis and to your hand.
To Next Page
Loading...
