GE Vivid q N - Page 608

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
8-102 Section 8-5 - Software Loading
NOTE: If USB HDD is in the Excluded menu (as shown below), move it to the Boot priority order list by selecting
USB HDD and pressing the x keyboard key.
With USB HDD now listed in Boot priority order (as shown below), promote it to the second position in
the list by selecting it, then while pressing and holding <Shift>, repeatedly pressing the + button until
USB HDD is in the number 2 position (Figure 8-112).
4.) Click the Exit menu and select Exit Saving Changes.
5.) When prompted, click Yes to confirm and exit.
6.) Return to step 5 on page 8-101 to complete the Preparation procedures.
Figure 8-113 Exiting BIOS Settings and Saving Changes