GE Vivid q N - Page 622

GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
8-116 Section 8-5 - Software Loading
2.) Press <Enter> to access Advanced Chipset Control (Figure 8-116).
3.) Set the parameters for Enable memory gap: as shown above in Figure 8-116.
4.) Press <Esc> to return to the Advanced menu home screen (Figure 8-115).
5.) Scroll to PCI/PNP Configuration and press <Enter> to open the PCI/PNP Configuration screen.
6.) Set the parameters in the PCI/PNP Configuration screen as shown above in Figure 8-117.
7.) Press <Esc> to return to the Advanced menu home screen (Figure 8-115).
Figure 8-116 BIOS Advanced Chipset Control Parameters
Figure 8-117 BIOS Advanced PCI/PNP Parameters