Section 3: Programming Operator Manual
G1900™
© Genmega 2011
3.16
3.3.6 DEVICE SETUP
The Device Setup menu provides options to adjust parameters of the various
peripherals. Under normal circumstances you should not need to make changes to
these parameters. The default settings are optimized for your particular machine.
Genmega recommends only using these tools under the direction of an Authorized
Service Provider (ASP) or Genmega Technical Support.
3.3.6.1 SPR SETUP
The SPR Setup allows you to set the maximum column width for the receipt printer.
Default is 40 characters.
To Next Page
Loading...