Genmega G1900 - Emptying the Reject bin (TCDU)

Section 4: Operation Operator Manual
G1900™
© Genmega 2011
4.11
4.2.2 Emptying the Reject Bin
Step 1
Insert the key into the reject bin lock and
turn to unlock.
Step 2
Pry back on the plastic tabs at the base of the
arrow stickers on each side of the reject bin.
Lift the reject bin lid.
Step 3
With the reject bin open, remove any notes
and then close the top. Turn the key to lock
the reject bin in place.