Applications Zoom | 139
4) Select Accuracy Limit:
• Status: On to activate a warning message if the calculated standard
deviation exceeds the limit.
• Set the accuracy limits for the Easting, Northing and Height coordi-
nates and the standard deviation angle.
• Press OK to save the limits and return to the Pre-settings screen.
5) Select GO! to begin the application.
Enter target data Enter the name of the station and the height of the instrument in the Station
data screen and press OK.
Next step
To access the Sight target point screen:
• Either, press OK after entering the target data fields in the Target data
screen.
• Or, press SKIP to skip entering the target data fields again when
measuring the same point in another face.
To Next Page
Loading...
Need help?
General
