Zoom | 54Settings
Crossh ill. Low,
Medium or
High
Sets the illumination level of the crosshairs.
Heating On The display heater is activated.
Off The display heater is deactivated.
)
The display heater is automatically activated when the display
illumination is on and the instrument temperature is 5°C.
Data
Output
Sets the location for data storage.
Int. Mem. All data is recorded in the internal memory.
Interface Data is recorded via the serial interface or the
USB device port, depending on the port selected
in the COMMUNICATION SETTINGS screen.
This Data Output setting is only required if an
external storage device is connected and meas-
urements are started at the instrument with
MEAS/REC or ALL. This setting is not required if
the instrument is totally controlled by a data-
logger.
Field Description
To Next Page
Loading...
Need help?
General
