1
INTRODUCTION
Description
The GS15
plus
is a state of the art 15-inch (38.1 cm) plotter designed
for use with the GRAPHIX ADVANTAGE
system and other sign
design systems.
Note: When used with GRAPHIX ADVANTAGE systems, the GS15
plus
requires GRAPHIX ADVANTAGE 4.3 or higher. When GS15
plus
is used
with other sign design systems, contact the system manufacturer to
obtain a driver for the GS15
plus
.
The GS15
plus
features Gerber's exclusive Knife Mode Switching™
Technology, which offers the operator a choice of two cutting modes
selectable from the plotter keypad:
! Tangential Knife Mode keeps the blade aligned with the direction
of plotting motion for cutting thick materials such as sandblast
stencil and for pouncing patterns.
! Swivel Knife Mode is used for rapid cutting of all but the most
demanding materials such as sandblast stencil. Gerber's exclusive
Corner Correcting Technology™ assures sharp, easy-to-weed
corners in swivel knife mode.
Performance
The GS15
plus
is designed to precisely register graphics up to 50 yards
(45.7 meters) long using carbide blades for crisp, sharp cuts.
When used with the GRAPHIX ADVANTAGE, the GS15
plus
uses the
Plot Spooler feature to receive and plot files while the operator
continues to design at the system.
To Next Page
Loading...
