20 GS15
plus
! Worn blades require increased tool force settings.
! Before cutting, refer to the Plotter User Reference Card at the back
of this manual for suggested tool force settings for different tools
and materials. Set the tool force accordingly. If you find that
different tool force settings produce more satisfactory results with
your particular system, tools, and materials, be sure to mark the
preferred settings on your card for future use.
ADJUSTMENTS
Several factors affect tool force and require setting changes:
! Type of material — See Plotter User Reference Card.
! Knife mode and tool — Drawing, pouncing, and cutting, knife mode,
and blade angle all affect the tool force setting
! Blade wear — Increase tool force after several thousand cuts.
Gerber recommends experimenting with tool force settings as well as
keeping a logbook of the settings. Refer to the Plotter User Reference
Card for guidelines.
To Next Page
Loading...
