12 GS15
plus
Note: The Default Plotter note in the lower right corner of the dialog
box tells you the name of the plotter your jobs will be sent to unless
otherwise specified in the Plot program.
7. Click on Continue. The screen will return to the GSP Setup Menu.
8. Double-click on the Control Bar to exit the GSP Setup Menu. The
system will return to the GSP GRAPHIX ADVANTAGE program
group and you can now access the GS15
plus
plotter.
Add Plotters
Multiple plotters can be added to your system. They must be added one
by one.
1. Click on the plotter you wish to add from the plotters list box.
2. Click on the port it will be connected to.
3. Click on Add. The highlighted plotter is added to the Ready for
Plotting list box.
Note: For each plotter you add, a number is added after the plotter
model number (for example, GS 15-1 for the first plotter added,
GS 15-2 for the second).
Delete Plotters
To remove plotters from the system:
1. In the Ready for Plotting box, click on the name of the plotter to be
deleted.
2. Click on Delete.
To Next Page
Loading...
