Gerber GS15 Plus - Assign Default Plotter

Setup 13
Assign Default Plotter
A default plotter can be assigned if more than one plotter is connected to
the GRAPHIX ADVANTAGE.
Note: There must be two or more plotter names in the Ready for
Plotting box to select a default plotter. If only one plotter is installed to
the GRAPHIX ADVANTAGE system, that plotter will automatically be
assigned as the default plotter.
1. Highlight the name of the desired default plotter in the Plotters box.
2. Click on Preference.
3. Click on OK. The name of the default plotter selected will appear
below the words Default Plotter.
4. Click on Continue. The screen returns to the GSP Setup menu.
5. Double-click on the Control Bar to exit the GSP Setup menu. The
system will return to the GSP GRAPHIX ADVANTAGE program
group.