54 GS15
plus
5. Pull out the light gray fuse carriers one at a time. Note that each
carrier has a white arrow on it and that the arrow points downward
(as do the two arrows on the black plastic plate).
6. Examine each fuse. Remove any blown fuse. Install a new fuse of
the same type and rating in the same place.
7. Reinsert each carrier, with the arrow pointing downward. Be sure
the carriers are inserted all the way. Close the black plastic plate
firmly.
8. Reinstall the power cord and the cable connector. Turn the power
on at the system and at the plotter.
To Next Page
Loading...
